Recent developments in occupational asthma.

PURPOSE OF REVIEW: Occupational asthma (OA) is a complex condition that can be difficult to diagnose. The purpose of this review is to describe some recent findings regarding the epidemiology of OA, the occupational sensitizing agents, the prognosis of OA, and its primary prevention. RECENT FINDINGS: The risk of developing OA varies according to the geographic localization of the worker, the type of industry and the type of sensitizing agents. New findings have been reported for several known sensitizing agents, such as isocyanates, seafood & cleaning agents, and their related industries, such as hairdressing salons and schools. Moreover, a few new sensitizing agents, such as cannabis, have been identified in the past few years. The prognosis of OA seems worse than that of nonwork-related asthma. It is mainly determined by the duration and the level of exposure. Primary prevention is crucial to reduce the number of new cases of OA. Complete avoidance of exposure to the causal agent remains the optimal treatment of sensitizer-induced OA. SUMMARY: Improving our knowledge regarding OA and its causative agents is key to enable an early recognition of this condition and improve its prognosis. Further research is still needed to improve primary prevention.

Severe allergic systemic reaction to personal protective equipment during the COVID-19 pandemic.

Our case describes a hospital worker who suffered a severe reaction to personal protective equipment (PPE) during the COVID-19 pandemic. After researching the excipient list of her PPE and completing a literature review, we postulated that isocyanates used in the production of the polyurethane band of the N95 mask was the cause for her reaction. In the absence of standardised testing, we tested this hypothesis by replicating her reaction to PPE by using a commercially available isocyanate patch, identifying diphenylmethane-4, 4-diisocyanate as the culprit agent.We recommended caution in the use of polyurethane containing N95 masks- for people reporting allergic reaction- and testing for sensitivity for polyurethane. The patient was able to tolerate non-polyurethane containing standard surgical masks, providing an option for PPE in some clinical circumstances. Since avoiding N95 masks, she has not had any further reactions.

[Allergy and immunotoxicology in preventive and clinical medicine from theory to practice: Occupational allergy and isocyanate-induced asthma].

Genetic and environmental factors and their interactions cause diseases and deteriorate health (Genetic and Environmental Interaction). Exposure to environmental factors plays a major role in the deterioration of health in the workplace.Occupational asthma (OA) is a common disorder in the workplace. Approaches to OA are well described and discussed in "Japanese Guideline for Diagnosis and Management of Occupational Allergic Diseases" by the Japanese Society of Occupational and Environmental Allergy. According to the guideline, OA and work-aggravated asthma comprise work-related asthma, and OA can be further divided into two disease entities: sensitizer-induced OA and irritant-induced OA. The guidelines also describe diagnostic and therapeutic strategies for OA. Since a definitive diagnosis of OA requires a comprehensive decision based on a detailed interview on clinical symptoms related to employment status and clinical tests, including inhalation tests of suspected substances as needed, the possibility of OA should be considered as the first step toward diagnosis of the patient. Otherwise, OA may not be diagnosed. Therapeutic strategies include exposure avoidance, environmental arrangements in the workplace, utilization of social resources for workers, and conventional pharmacotherapy for asthma.Artificially synthesized small compounds are used in various industries and can cause allergies. For example, isocyanates are small compounds in the -NCO group, which have been toxicologically studied. It was later shown that isocyanate could cause various nontoxic adverse health effects, including allergic reactions. Since small agents with low molecular weights bind to proteins, detecting their specific immunoglobulin E (IgE) antibodies targeting small compounds is generally difficult. In contrast, isocyanate-specific IgE antibodies are detectable in individuals with isocyanate allergies.Suspecting OA is essential in cases exposed to newly synthesized compounds, or to those that are already known but applied to new uses, which can be better understood and predicted by studying the health effects of isocyanates.Academic interest in various issues related to allergies, immunology, and toxicology in the workplace includes clinical medicine, epidemiology, and epigenetics related to environmental exposure. Further advanced research in these areas is necessary and promising.

Isocyanates may contribute to allergic contact dermatitis from diabetes devices and wound dressings.

BACKGROUND: Isocyanates are well-known occupational allergens, but can also be present in medical devices. OBJECTIVES: To highlight that contact sensitization to isocyanates might contribute to allergic contact dermatitis (ACD) from polyurethane (PU)-containing diabetes devices and wound dressings. PATIENTS AND METHODS: Nineteen patients with suspected ACD from diabetes devices and/or wound dressings were patch tested to an isocyanate series. Four wound dressings, six diabetes devices and four monomeric isocyanate patch test preparations were analysed with gas chromatography - mass spectrometry. RESULTS: Eight patients reacted to isocyanates and corresponding amines: 3 to isophorone diisocyanate (IPDI), 4 to 4,4'-diaminodiphenylmethane (MDA), 4 to 2,4-toluene diisocyanate (TDI) and 1 to polymeric methylene diphenyl diisocyanate (PMDI). Three of four wound dressings contained isocyanates (methylene diphenyl diisocyanate [MDI], TDI and/or IPDI), whereas five of six diabetes devices contained 4,4'-MDI, and one of them also IPDI. None of the medical devices contained 1,6-hexamethylene diisocyanate. Contrary to IPDI, and especially MDI, only the concentration of the TDI patch test preparation corresponded approximately (80%) to its label. CONCLUSION: Patch tests with isocyanates may be worth-while in patients with suspected ACD from PU-containing medical devices. Besides MDA, and PMDI, also TDI might potentially be a marker for MDI-sensitization.

Viability of cultured human skin cells treated with 1,6-hexamethylene diisocyanate monomer and its oligomer isocyanurate in different culture media.

The isocyanate monomer 1,6-hexamethylene diisocyanate (HDI) and one of its trimers, HDI isocyanurate, are airway and skin sensitizers contained in polyurethane paint. The toxic response of cultured skin cells to these compounds was measured by evaluating the isocyanate concentrations at which 50% of the cells die (i.e., lethal concentration 50%, LC50) because the relative toxicity of each form of HDI should be considered when exposure limits of HDI-based paints are set. By using a luminescent ATP-viability assay, we compared the cytotoxic effects of HDI monomer and HDI isocyanurate on cultured human skin cells (keratinocytes, fibroblasts, and melanocytes) after 4-h isocyanate exposures using culture media with varying levels of nutrients in order to also determine the effects of media composition on isocyanate toxicity. Before analysis, experimental wells were normalized to controls containing cells that were cultured with the same vehicle and media. The measured mean LC50 values ranged from 5 to 200 µM across the experimental conditions, in which HDI isocyanurate in protein-devoid media was the most toxic to cells, producing the lowest LC50 values. For HDI monomer, keratinocytes were the most resistant to its toxicity and melanocytes were the most susceptible. However, when exposed to HDI isocyanurate, the opposite was observed, with melanocytes being the most resilient and the keratinocytes and fibroblasts were more susceptible. Depending on the type of skin cells, dose-response data indicated that HDI isocyanurate was 2-6 times more toxic than HDI monomer when using protein-devoid media whereas HDI isocyanurate was 4-13 times more toxic than HDI monomer when protein-rich media was used. Therefore, if the protein-devoid saline medium alone were used for these experiments, then a significant under-estimation of their relative toxicities in protein-rich environments would have resulted. This difference is because HDI monomer toxicity was more attenuated by the presence of protein in the culture media than HDI isocyanurate toxicity. Thus, conclusions based on comparative toxicity studies and consequent inference applied to potential human toxicity can be affected by in vitro culture media conditions. The physiochemical difference in reactivity of the two forms of HDI to biological molecules most likely explains the observed toxicity differences and may have implications for skin penetration, adverse effects like skin sensitization, and systemic responses like asthma. Future studies are warranted to investigate differences in the biological availability, cellular toxicity, and immunologic sensitization mechanisms for HDI monomer and HDI isocyanurate.

Endotyping asthma related to 3 different work exposures.

BACKGROUND: Work exposures play a significant role in adult-onset asthma, but the mechanisms of work-related asthma are not fully elucidated. OBJECTIVE: We aimed to reveal the molecular mechanisms of work-related asthma associated with exposure to flour (flour asthma), isocyanate (isocyanate asthma), or welding fumes (welding asthma) and identify potential biomarkers that distinguish these groups from each other. METHODS: We used a combination of clinical tests, transcriptomic analysis, and associated pathway analyses to investigate the underlying disease mechanisms of the blood immune cells and the airway epithelium of 61 men. RESULTS: Compared with the healthy controls, the welding asthma patients had more differentially expressed genes than the flour asthma and isocyanate asthma patients, both in the airway epithelia and in the blood immune cells. In the airway epithelia, active inflammation was detected only in welding asthma patients. In contrast, many differentially expressed genes were detected in blood cells in all 3 asthma groups. Disease-related immune functions in blood cells, including leukocyte migration and inflammatory responses, and decreased expression of upstream cytokines such as TNF and IFN-γ were suppressed in all the asthma groups. In transcriptome-phenotype correlations, hyperresponsiveness (R ∼ |0.6|) had the highest clinical relevance and was associated with a set of exposure group-specific genes. Finally, biomarker subsets of only 5 genes specifically distinguished each of the asthma exposure groups. CONCLUSIONS: This study provides novel data on the molecular mechanisms underlying work-related asthma. We identified a set of 5 promising biomarkers in asthma related to flour, isocyanate, and welding fume exposure to be tested and clinically validated in future studies.

Identification of late asthmatic reactions following specific inhalation challenge.

Specific inhalation challenge (SIC) is the reference standard for the diagnosis of occupational asthma. Current guidelines for identifying late asthmatic reactions are not evidence based. OBJECTIVES: To identify the fall in forced expiratory volume in 1 s (FEV1) required following SIC to exceed the 95% CI for control days, factors which influence this and to show how this can be applied in routine practice using a statistical method based on the pooled SD for FEV1 from three control days. METHODS: Fifty consecutive workers being investigated for occupational asthma were asked to self-record FEV1 hourly for 2 days before admission for SIC. These 2 days were added to the in-hospital control day to calculate the pooled SD and 95% CI. RESULTS: 45/50 kept adequate measurements. The pooled 95% CI was 385 mL (SD 126), or 14.2% (SD 6.2) of the baseline FEV1, but was unrelated to the baseline FEV1 (r=0.06, p=0.68), or gender, atopy, smoking, non-specific reactivity or treatment before or during SIC. Thirteen workers had a late asthmatic reaction with ≥2 consecutive FEV1 measurements below the 95% CI for pooled control days, 4/13 had <15% and 9/13 >15% late fall from baseline. The four workers with ≥2 values below the 95% CI all had independent evidence of occupational asthma. CONCLUSION: The pooled SD method for defining late asthmatic reactions has scientific validity, accounts for interpatient spirometric variability and diurnal variation and can identify clinically relevant late asthmatic reactions from smaller exposures. For baseline FEV1 <2.5 L, a 15% fall is within the 95% CI.

Development of a method for quantification of toluene diisocyanate and methylenediphenyl diisocyanate migration from polyurethane foam sample surface to artificial sweat by HPLC-UV-MS.

The US Environmental protection agency (EPA) has published guidance that includes test procedures for evaluating indoor exposure to chemicals from products. One of the test procedures represents the migration test for evaluating potential dermal exposure from home furniture. Such an evaluation involves the chemical measurement of the sweat which is currently unavailable in the literature. The objective of this project was to develop and validate an analytical method for quantification of migration of 4,4'-methylenediphenyl diisocyanate (MDI), 2,6-toluene diisocyanate (2,6-TDI) and 2,4-toluene diisocyanate (2,4-TDI) from a polyurethane (PU) flexible foam to artificial sweat that meets the recommendations of the EPA test protocol. Following the EPA protocol, six synthetic sweat solutions were prepared and used in evaluation of isocyanate recovery performance. The migration tests were conducted using five foam types that were chosen and supplied by PU foam manufacturers to represent the types most commonly found in commercial products, and with formulations anticipated to have the highest potential residual TDI or MDI. Migration tests were conducted using glass fiber filters (GFF) coated with 1-(2-methoxyphenyl)piperazine (1,2-MP) and analyzed using HPLC equipped with a UV detector for quantification and a MS detector to qualify peaks. The detection limits of the method were 0.002 µg/mL for 2,6-TDI, 0.011 µg/mL for 2,4-TDI, and 0.003 µg/mL for MDI. Quantification limits were 0.006 µg/mL, 0.037 µg/mL, and 0.010 µg/mL, respectively. The recovery tests on a Teflon surface for 5 of the 6 EPA-recommended synthetic sweat solutions indicate the recovery percentage was approximately 80% for diisocyanates. Recovery for the sixth sweat solution was low, approximately 30%. TDI and MDI migration was not observed when testing was conducted on foam samples.

12-year data on dermatologic cases in the Finnish Register of Occupational Diseases I: Distribution of different diagnoses and main causes of allergic contact dermatitis.

BACKGROUND: Skin diseases are among the most common occupational diseases, but detailed analyses on their epidemiology, diagnoses, and causes are relatively scarce. OBJECTIVES: To analyze data on skin disease in the Finnish Register of Occupational Diseases (FROD) for (1) different diagnoses and (2) main causes of allergic contact dermatitis (ACD). METHODS: We retrieved data on recognized cases with occupational skin disease (OSD) in the FROD from a 12-year-period 2005-2016 and used national official labor force data of the year 2012. RESULTS: We analyzed a total of 5265 cases, of which 42% had irritant contact dermatitis (ICD), 35% ACD, 11% contact urticaria/protein contact dermatitis (CU/PCD), and 9% skin infections. The incidence rate of OSD in the total labor force was 18.8 cases/100 000 person years. Skin infections concerned mainly scabies in health care personnel. Twenty-nine per cent of the ACD cases were caused by plastics/resins-related allergens, mainly epoxy chemicals. Other important causes for ACD were rubber, preservatives, metals, acrylates, and hairdressing chemicals. Cases of occupational ACD due to isothiazolinones reached a peak in 2014. CONCLUSION: Our analysis confirms that epoxy products are gaining importance as causes of OSD and the isothiazolinone contact allergy epidemic has started to wane.

Costs of isocyanate-related occupational diseases: A systematic review.

Although isocyanates are increasingly used in manufacturing and workplace exposure to isocyanates is widely recognized as one of the most frequent causes for occupational lung and skin diseases, little is known about the economic burden on the affected individual and the society. This study provides an overview on costs of occupational diseases related to isocyanates. We performed a systematic literature search of studies in the electronic databases of the German Institute of Medical Documentation and Information, and the Canadian Centre for Occupational Health and Safety. We extracted the key characteristics of the studies and performed a study quality assessment. We identified eight studies on the costs of illness, of which five focused on occupational lung diseases and three on occupational skin diseases. Further, eight studies calculated loss of income/compensation payments. Out of the 16 identified articles, only two reported costs directly attributable to isocyanate-induced diseases (asthma). Studies were hardly comparable because they differed substantially in their methodological approaches. Moreover, the quality assessment of the studies revealed substantial limitations. While a wide range of isocyanate-related costs was identified, consequences of isocyanate-related occupational diseases were considerable in terms of societal costs and loss of income. In most studies, indirect costs were the main cost driver. There is a need for high-quality cost of illness studies on isocyanate-induced diseases stratified by degree of severity and sex. Such studies provide valuable information to develop preventive strategies and set priorities for measures to lower the burden of professional health risks.

Circulating miRs-183-5p, -206-3p and -381-3p may serve as novel biomarkers for 4,4'-methylene diphenyl diisocyanate exposure.

BACKGROUND: Occupational exposure to the most widely used diisocyanate, 4,4'-methylene diphenyl diisocyanate (MDI), is a cause of occupational asthma (OA). Early recognition of MDI exposure and sensitization is essential for the prevention of MDI-OA. OBJECTIVE: Identify circulating microRNAs (miRs) as novel biomarkers for early detection of MDI exposure and prevention of MDI-OA. MATERIALS AND METHODS: Female BALB/c mice were exposed to one of three exposure regimens: dermal exposure to 1% MDI in acetone; nose-only exposure to 4580 ± 1497 µg/m3 MDI-aerosol for 60 minutes; or MDI dermal exposure/sensitization followed by MDI-aerosol inhalation challenge. Blood was collected and miRCURY™ miRs qPCR Profiling Service was used to profile circulate miRs from dermally exposed mice. Candidate miRs were identified and verified from mice exposed to three MDI-exposure regimens by TaqMan® miR assays. RESULTS: Up/down-regulation patterns of circulating mmu-miRs-183-5p, -206-3p and -381-3p were identified and verified. Circulating mmu-miR-183-5p was upregulated whereas mmu-miRs-206-3p and -381-3p were downregulated in mice exposed via all three MDI exposure regimens. DISCUSSION AND CONCLUSION: Upregulation of circulating miR-183-5p along with downregulation of circulating miRs-206-3p and -381-3p may serve as putative biomarkers of MDI exposure and may be considered as potential candidates for validation in exposed human worker populations.

Basal PPARα inhibits bile acid metabolism adaptation in chronic cholestatic model induced by α-naphthylisothiocyanate.

Cholestasis is one of the most challenging diseases to be treated in current hepatology. However little is known about the adaptation difference and the underlying mechanism between acute and chronic cholestasis. In this study, wild-type and Pparα-null mice were orally administered diet containing 0.05% ANIT to induce chronic cholestasis. Biochemistry, histopathology and serum metabolome analysis exhibited the similar toxic phenotype between wild-type and Pparα-null mice. Bile acid metabolism was strongly adapted in Pparα-null mice but not in wild-type mice. The Shp and Fxr mRNA was found to be doubled in cholestatic Pparα-null mice compared with the control group. Western blot confirmed the up-regulated expression of FXR in Pparα-null mice treated with ANIT. Inflammation was found to be stronger in Pparα-null mice than those in wild-type mice in chronic cholestasis. These data chain indicated that bile acid metabolism and inflammation signaling were different between wild-type and Pparα-null mice developing chronic cholestasis, although their toxic phenotypes could not be discriminated. So basal PPARα cross-talked with FXR and inhibited bile acid metabolism adaptation in chronic cholestasis.

Óxido Nítrico como biomarcador en asma ocupacional inducida por isocianatos en talleres de pintura automotriz / Nitric-Oxide as Biomarker in Isocyanate-Induced Occupational Asthma at the Vehicle Paint and Body Repair Industry

Introducción: El asma ocupacional (AO) es la enfermedad respiratoria de origen laboral más prevalente en los países desarrollados. Ocurre principalmente por exposición inhalatoria a agentes como el isocianato, contenido en las pinturas utilizadas en el sector automotriz. Su diagnóstico depende de varios factores y está en estudio la utilidad de la fracción espirada de óxido nítrico (FeNO) como marcador de inflamación respiratoria, siendo un método sencillo, rápido y no invasivo. Este trabajo resume la evidencia científica sobre la utilidad de FeNO en la evaluación del asma inducida por isocianato. Material y Métodos: Se realizó una revisión sistemática de la literatura científica publicada en 6 bases de datos, utilizando ecuaciones de búsqueda en términos MeSH. Se procedió a un cribado de las referencias y se seleccionaron los artículos basándonos en los objetivos del estudio y en los de mayor evidencia científica según SIGN. Resultados: Se recuperaron 45 referencias y se incluyeron 8 en la revisión; 7 de ellos fueron de diseño transversal. Hubo asociación estadísticamente significativa entre hiperreactividad bronquial (HRB) y FeNO en trabajadores expuestos a isocianato en todos los artículos, con excepción de uno. Conclusiones: A pesar de las limitaciones en los estudios revisados en cuanto al tipo de diseño, tamaño de la muestra y objetivos, se demuestra que existe evidencia científica que apoya la utilidad del FeNO en la evaluación del asma ocupacional por isocianatos

Introduction: Occupational asthma (AO) is the most predominant work-related respiratory illness in developing countries. It shows up mainly due to the inhalation of agents like isocyanate, a compound used during automobile painting application and widely used in the vehicle body repair industry. Its diagnosis is multifactorial. The nitric oxide fraction concentration in exhaled breath (FeNO) as a marker of respiratory inflammation is a simple, fast and non-invasive method. This paper summarizes the scientific evidence on the usefulness of FeNO in the assessment of isocyanate induced asthma. Material and Methods: A systematic review of the published scientific literature was carried out in 6 databases, using search equations in terms of MeSH. The references were filtered and the articles were selected based on the objectives of the study and on the highest scientific evidence according to SIGN. Results: 45 references were retrieved and 8 were included in the review; 7 of them were of transversal design. With the exception of one of them, there was a statistically significant association between bronchial hyperresponsiveness (BHP) and FeNO in isocyanate exposed workers in all articles. Conclusions: Despite the limitations of the reviewed studies regarding design type, sample size and objectives, it is showed that there is scientific evidence supporting the validity of FeNO in the assessment of occupational asthma by isocyanates

Nasal protein profiles in work-related asthma caused by different exposures.

BACKGROUND: The mechanisms of work-related asthma (WRA) are incompletely delineated. Nasal cell samples may be informative about processes in the lower airways. Our aim was to determine the nasal protein expression profiles of WRA caused by different kind of exposures. METHODS: We collected nasal brush samples from 82 nonsmoking participants, including healthy controls and WRA patients exposed to (i) protein allergens, (ii) isocyanates and (iii) welding fumes the day after relevant exposure. The proteome changes in samples were analysed by two-dimensional difference gel electrophoresis, and the differentially regulated proteins found were identified by mass spectrometry. Immunological comparison was carried out using Western blot. RESULTS: We detected an average of 2500 spots per protein gel. Altogether, 228 protein spots were chosen for identification, yielding 77 different proteins. Compared to the controls, exposure to protein allergens had the largest effects on the proteome. Hierarchical clustering revealed that protein allergen- and isocyanate-related asthma had similar profiles, whereas asthma related to welding fumes differed. The highly overrepresented functional categories in the asthma groups were defence response, protease inhibitor activity, inflammatory and calcium signalling, complement activation and cellular response to oxidative stress. Immunological analysis confirmed the found abundance differences in galectin 10 and protein S100-A9 between the groups. CONCLUSIONS: Work-related asthma patients exposed to protein allergens and isocyanates elicit similar nasal proteome responses and the profiles of welders and healthy controls were alike. Revealed biological activities of the protein expression changes are associated with allergic inflammation and asthma.